How To Install Window Blinds In Charlotte

Countless Charlotte residents turn to window blinds when they need more privacy and control over natural light in their interiors. They’re a useful and economical window covering. Skilled do-it-yourselfers can also attach them in just a few steps. But, nothing is better than hiring an expert window treatment installer. Here are the basics of installing window blinds and when you should contact the pros to complete it for you.

Take Precise Measurements

Prior to starting, figure out if you want inside-mount blinds or outside-mount. This crucial decision will help you see where to measure. Get measurements of the width, height, and depth within your frame for inside-mount options. When attaching outside-mount blinds, find the width and height of your window, including the trim, and add three inches to your measurements to make sure you get adequate coverage. Measure precisely–don’t round up or down. Ill-fitting blinds will fail to work smoothly.

Shop For Blinds

After you know your measurements, you may choose your blinds. You probably know what type of blinds you want. Buy blinds that are as near to your measurements as possible. Off-the-shelf blinds may not fit perfectly, either extending out too far or not meeting the window edge properly. Be sure to get hardware that allow you to hang the blinds at the right depth, also. You’ll want to order specially made blinds and parts for the best fit.

Install Your Window Blinds

Your blinds may be accompanied by instructions. Adhere to them to install your particular product. If you wish to have a sample of how difficult it is to install window blinds in Charlotte, here is a summary of general steps to give you a better idea.

 

Inside Mount Blinds

 

1. Place a bracket at the top of the window frame approximately an inch from the outer edge. Check that this positioning won’t hinder the blind’s operation. Use a pencil to mark the bracket holes.
2. Drill pilot holes in the indicated areas.
3. Situate the bracket over your holes and drill in the screws.
4. Duplicate these first three steps for the other bracket.
5. Snap the end caps onto the blind’s top rail. Position the headrail into the brackets.

Attach the tilt wand and test. In addition, try out the pull cord.

Outside Mount Blinds

1. Figure out if you’re installing on the wall above the window or the window trim. Hold the headrail in place and make sure the blind reaches the bottom of the window.
2. Mark each end of the headrail.
3. Measure four inches from your headrail marks and mark here for the screws.
4. Drill pilot holes in the proper spots.
5. Align the bracket holes with your wall holes and fasten with screws at each end.
6. Position the top rail into the brackets.

Connect the tilt wand and test to ensure everything works.

Pick The Easiest Way To Install Blinds 

As you know, you don’t have to do blinds on your own. The easiest way to install window blinds in Charlotte is to employ a professional window treatment installer. They will work with you every step of the way. They’ll help you pick blinds that meet your requirements, make exact measurements for a custom product, and install them for you. They do this daily, so they’ll complete your project swiftly and correctly. They will diagnose any issues without taking hours trying to find help on websites. A window treatment installer will also offer higher-quality blinds than box stores or online resellers.

Avoid The Trouble And Hire Sunburst Shutters To Install Your Window Blinds In Charlotte

Installing window blinds in Charlotte couldn’t be simpler when you consult with Sunburst Shutters Charlotte. We’ll help you find custom blinds that will suit your windows perfectly, and our skilled installation crew will affix them for you. All you have to do is contact 980-231-1116 or complete the form below to request a no-cost in-home consultation.